• M.S., Environmental Engineering, Virginia Polytechnic Institute and State University
• B.S., Civil Engineering, Virginia Polytechnic Institute and State University

• Mr. Luettinger has 28 years of experience with planning, design, and construction management services for water, wastewater, and storm water infrastructure projects ranging in size up to $90 million.
• Senior large diameter pipeline engineer at Bowen Collins & Associates with experience on over 100,000 feet of steel pipeline projects up to 120-inches in diameter.
• Experienced with the evaluation and design of water conveyance facilities including intake structures, booster pump stations, irrigation pump stations, and deep well pump stations.
• Experienced with the evaluation and design of water treatment facilities, including chlorination facilities, fluoridation facilities, polymer feed, grit removal and screening, pre-ozonation facilities, flash mix facilities, flocculation and sedimentation, and water treatment plant hydraulic evaluations.

• M.S., Civil and Environmental Engineering, Utah State University
• B.S., Civil and Environmental Engineering, Utah State University

• Mr. Bagley is currently a principal and Chairman of the Board of Directors at Bowen Collins & Associates and one of the three founding partners of Bowen Collins & Associates. Mr. Bagley has over 36 years of experience as an engineering consultant and is a Certified Floodplain Manager (CFM). He specializes in hydraulics, hydrology, and water resources.
• He has extensive experience in master planning and designing water, wastewater, and storm water management facilities and in providing engineering services and oversight for projects dealing with hazardous waste and environmental issues.
• He has been responsible for the design of water, sewer, storm drain, and irrigation pipelines; storm water debris and detention basins; water, sewer, and storm drain pump stations; dam safety/rehabilitation projects; municipal water storage tanks; and water regulating and diversion structures.

• B.S., Civil Engineering, Utah State University

• M.S., Civil and Environmental Engineering, University of California – Davis
• B.S., Civil and Environmental Engineering, University of Utah

• Mr. Larson has 23 of experience in planning, design, and construction management of a wide variety of water, wastewater, and storm drain related projects, including over 500,000 feet of pipeline in diameters up to 120 inches.
• Extensive experience with water and wastewater rate and impact fee studies in Utah and Nevada.
• Experience working with the Federal Emergency Management Agency (FEMA) and flood insurance regulations.
• Expert with multiple hydraulic and hydrologic computer modeling applications.
• Detailed training and experience in the evaluation and design of hydraulic surge protection facilities.

• M.S., Civil Engineering, Utah State University
• B.S., Civil Engineering, University of Utah

• Mr. Loscher has 23 year of experience in master planning, design, and management of water resources projects
• Extensive experience in planning, design and construction management of drinking water storage reservoir projects ranging in size from 2 to 50 million gallons.
• Experienced in master planning, hydrologic and hydraulic modeling of drainage and flood control systems, as well as design of storm drain projects including detention basins, debris structures and pipelines.
• Experienced in hydraulic modeling of water distribution, pumping, storage and conveyance facilities, and design of water infrastructure projects including well pump stations, booster pump stations, fluoridation facilities, storage tanks, and pipelines.

• B.L.A., Landscape Architecture, Utah State University

• Ms. Tsandes has 23 years of experience and is a graduate of Utah State University from the Department of Landscape Architecture and Environmental Planning. She manages the environmental and landscape architectural design services at BC&A.
• Her areas of expertise include the management, oversight and preparation of environmental documents (NEPA), environmental permitting, wetlands, stream channel design, habitat restoration and mitigation, design of parks and trails, and water conservation.
• She provides agency and public coordination/outreach for BC&A projects that involve utilities, infrastructure, community enhancement, and environmental projects.

• B.S., Civil Engineering, Utah State University

• Mr. Bagley has 30 years of experience in planning, design, and project management for various civil engineering projects in Utah.
• Project Civil Engineer for all of the civil improvements required for the Utah State Capital Restoration Projects.
• Project Civil Engineer for all of the civil improvement for the City Creek redevelopment project in downtown Salt Lake City.
• Managed the civil design for numerous site civil project including utility design, demolition, site development, grading and services during construction.
• Broad experience in the design of treatment plant yard piping and civil design, lift stations, pipelines, and storm detention facilities.

• M.S., Civil Engineering, Brigham Young University
• B.S., Civil Engineering, Brigham Young University

• Mr. Clark has 25 years of experience in the design of potable water treatment and delivery systems, including water treatment facilities design (arsenic removal), booster stations and pumping systems, mechanical design, and chemical feed systems.
• Mr. Clark’s experience includes management and design of large dam and reservoir facilities, including dam rehabilitation, dam safety studies, and storm water/flood detention facilities.
• Mr. Clark has extensive experience in water resources studies, large diameter pipeline alignment studies, and water systems master planning with the use of GIS software.
• Mr. Clark has many years experience in the design and construction management of wastewater conveyance facilities, including gravity and pumped sewer pipelines, sewer lift stations, sewer treatment processes, and odor removal.

• B.S., Civil Engineering, Brigham Young University

• B.S., Civil Engineering – Hydraulics and Water Resources, Utah State University

• Mr. Olsen has over 20 years of experience focused on planning, design and construction management services for water, wastewater, stormwater, and flood control/irrigation infrastructure projects.
• Extensive experience with hydraulic and hydrologic computer modeling applications including HEC-1, HEC-2, HEC-HMS, HEC-RAS, EPANET, and ArcGIS. 
• Experience as a construction manager, and on-site field representative in related wastewater, water, storm drainage and flood control projects.

• B.S., Environmental Engineering – Utah State University
• M.S., Civil and Environmental Engineering – Utah State University

• Mr. Oldham has 22 years of experience as project manager and on engineering teams for projects involving planning, design, construction, maintenance and repair of water, wastewater, roadway, communication, power utilities and commercial/industrial buildings.
• Experience as project construction manager on various projects with costs up to $9,000,000. 
• Before coming to BC&A, Jon served active duty in the United States Air Force as project manager and project engineer for a wide variety of projects in California, Utah and the United Arab Emirates.

• M.E., Civil Engineering, Utah State University
• B.S., Civil Engineering, Utah State University

• Mr. Wyatt has 22 years of experience as an engineering consultant.
• He is a project manager and project engineer for multiple water, wastewater, storm drain, and transportation design projects.
• His experience includes a wide array of projects from the design of small local storm water improvements to large, regional wastewater treatment plants.
• Mr. Wyatt has also been involved in all aspects of construction management ranging from on-site engineer’s representative to Owner’s representative and construction manager.

• B.S., Electrical Engineering, Boise State University

• Mr. Youngstrom has 22 years of experience as an electrical engineering consultant.
• He is experienced in designing lighting and low-voltage power distribution systems including switchgear, transformers, motor control centers, panelboards, and generators.
• He is also experienced in medium-voltage power distribution systems including metal-clad switchgear, MV fuses, MV transformers, and MV relays.
• In addition, he is experienced in programming and integration of MV relays, PLC’s, HMI’s and SCADA systems.
• He is also skilled in performing Fault Current Studies, Breaker Coordination Studies, and Arc Flash Studies.

• M.E., Civil & Environmental Engineering, Utah State University
• B.S., Civil Engineering, Utah State University

• Ms. Nelson has 15 years of experience which includes working on engineering teams involving planning, design, and construction management of water and wastewater projects.
• She has served as project manager or project engineer for the planning and design of water pipelines and other conveyance facilities utilizing traditional construction techniques and trenchless installation methods.
• Ms. Nelson’s experience includes the design of water pump stations, well houses and other control facilities.
• She has experience in the design of hydraulic structures including the development and rehabilitation of potable water springs, diversions structures, stream control structures, oil contamination prevention structures, and canal modifications.

• M.E., Civil Engineering, Utah State University
• B.S., Civil & Environmental Engineering, Utah State University

• Mr. Neil has 17 years of civil engineering experience with a vast knowledge of designing complex large projects. These projects include drinking water well pump house designs; secondary and sanitary sewer pump station designs; water, sewer and storm sewer pipeline designs; water reservoir designs; booster pump station projects; hydraulic modeling; site civil planning and design; and hydrologic and hydraulic studies and reports.

• B.S. Electrical Engineering, Boise State University

• Mr. Cavanaugh has 17 years of experience and has worked on many industrial and commercial electrical safety projects. He serves as one of Bowen Collins & Associate’s lead electrical engineers on electrical safety, power system studies, and NFPA 70E related topics. He has completed over 50 arc flash studies ranging from the small station projects with only a few arc flash labels, all the way to large industrial campuses with thousands of arc flash labels. Shane has also done extensive work related to NFPA 70E including consulting on safety audits, written electrical safety plans, PPE selection, and safety training.
• Shane has also has gained experience in project management, project pricing, lighting design, and low voltage power distribution.  He has experience in the design of fire alarm, SCADA, controls, and emergency power generation systems. With extensive experience in both power system design and electrical worker safety, Mr. Cavanaugh is able to incorporate each element in to all projects.

• M.A., Business Administration, University of Phoenix
• B.S., Civil Engineering, Utah

• Mr. Mecham has 24 years of experience which includes design and construction of diverse projects. These projects include water treatment plants, hydraulic structures, pipelines, roadways, bridges, sewer lift stations, large water tanks, well houses, concrete, masonry, steel, and wood-engineered buildings. Brian leads our team of construction managers who oversee several of our large and small scale project from bidding of the project to construction project close-out.

B.S. in Civil Engineering, Utah State University

M.S. in Civil and Environmental Engineering, Utah State University

• Mr. Anderson has 9 years of experience in hydraulic modeling, designing water conveyance systems, utility planning, sewer/storm drain infrastructure, financial analysis for utility rate studies and impact fee facility plans.
• In addition to experience with planning and design, Mr. Anderson provides construction management services on a number of projects in our St. George, Utah area office.
• Mr. Anderson is the lead author of a presentation for the Association of State Dam Safety Officials focusing on dam spillway vibrations.

B.S. in Civil Engineering, Brigham Young University

M.S. in Civil and Environmental Engineering, Brigham Young University

• Mr. Merrell has 14 years of experience and is a Certified Floodplain Manager with vast experience in roadway design, impact/risk analysis, roadway drainage design, and construction management. He has extensive and recent experience on flood control, drainage, and roadway projects and is registered in Utah, California, and Colorado.
• His civil engineering and drafting experience has made him a valuable asset to Bowen Collins & Associates and is our department lead for computer aided drafting and 3D design.
• In his years in professional practice, Mr. Merrell has analyzed, and designed drainage systems associated with numerous transportation and flood control projects throughout Utah and California.  This experience includes performing bridge and culvert hydraulic analyses using industry standard software and modeling techniques, performing large scale hydrologic analyses, designing open and closed stormwater drainage systems, and utilizing geographic information systems to analyze and catalog hydrologic data.

B.S. in Civil and Environmental Engineering, Utah State University

• Mr. Meyer has over 18 years of experience in sewer pipeline and manhole rehabilitation design, trenchless construction design, sewer collection systems design, and construction management.
• Mr. Meyer has experience in construction management and the cost analysis and estimation of several sewer projects for various wastewater districts and cities throughout the State of Utah and Colorado including for South Valley Sewer District’s Jordan River Outfall Relief Line Sewer Project where approximately 4,170 linear feet of 48-inch diameter sewer pipe was installed.
• Mr. Meyer is a certified inspector from the NASSCO Inspector Training Certification Program specifically designed for manhole and pipe rehabilitation. He is also certified with NASSCO for PACP (pipe), MACP (manhole), and LACP (lateral) condition assessments. He is also licensed in Utah, Colorado, and Idaho.